RUBBER EXPANSION JOINTS AND PUMP CONNECTORS

Metrasphere

Can your engineered pipe system stand the pressure? Protect pumps from temperature and pressure changes, and reduce noise and vibration, with Metrasphere. Our Metrasphere joint/flexible connector provides 225 PSI at temperatures up to 230° F!

The Metrasphere is the most widely applied expansion joint/flexible connector in the industry today. It provides the greatest pressure, temperature and movement, at a very reasonable cost. The Metrasphere's resiliency also helps control pulsation shocks and noise transmission.

Constructed of neoprene* and nylon (other materials are available see charts below), the spherical shape allows pressure to exert itself uniformly in all directions, thus reducing the force exerted on pipe lines and equipment. Bias-ply tire cord provides strength, a high safety factor, and low force to move. Precision molding provides a dense, uniform carcass.

Solid plate steel flanges grip the sealing area and provide a fluid tight connection. All flanges are tapped or drilled to mate with 150# or 300# companion flanges. The tapped bolt holes and rotatable flanges make installation easy. The arch is self-cleaning, thus eliminating the need for filled arch when solids are present in the stream.

Solid plate steel flanges grip the sealing area and provide a fluid tight connection. All flanges are tapped or drilled to mate with 150# or 300# companion flanges. The tapped bolt holes and rotatable flanges make installation easy. The arch is self-cleaning, thus eliminating the need for filled arch when solids are present in the stream.

Metrasphere's are available in different lengths and movements, and are designation as an "O" and "R" style. Choose the "O" or "R" version that meets the requirements of your specific application.

Click the links below to jump to a particular product info table.

 Metasphere

Back to Non-Metalic Joints/Connectors Page
Back To Expansion Joint Page

Metrasphere Style R - EPDM body, threaded bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSREE0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 CAD
MSREE0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 CAD
MSREE0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 CAD
MSREE0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 CAD
MSREE0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 CAD
MSREE0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 CAD
MSREE0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 CAD
MSREE1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 CAD
MSREE1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style O - EPDM body, threaded bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSOEE0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 CAD
MSOEE0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 CAD
MSOEE0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 CAD
MSOEE0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 CAD
MSOEE0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 CAD
MSOEE0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 CAD
MSOEE0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 CAD
MSOEE0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 CAD
MSOEE0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 CAD
MSOEE0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 CAD
MSOEE1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 CAD
MSOEE1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 CAD
MSOEE1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 CAD
MSOEE1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 CAD
MSOEE1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 CAD
MSOEE2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 CAD
MSOEE2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style R - Neoprene body, threaded bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRNN0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 CAD
MSRNN0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 CAD
MSRNN0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 CAD
MSRNN0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 CAD
MSRNN0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 CAD
MSRNN0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 CAD
MSRNN0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 CAD
MSRNN1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 CAD
MSRNN1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style O - Neoprene body, threaded bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSONN0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 CAD
MSONN0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 CAD
MSONN0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 CAD
MSONN0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 CAD
MSONN0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 CAD
MSONN0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 CAD
MSONN0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 CAD
MSONN0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 CAD
MSONN0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 CAD
MSONN0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 CAD
MSONN1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 CAD
MSONN1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 CAD
MSONN1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 CAD
MSONN1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 CAD
MSONN1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 CAD
MSONN2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 CAD
MSONN2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style R - Butyl body, threaded bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRBB0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 CAD
MSRBB0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 CAD
MSRBB0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 CAD
MSRBB0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 CAD
MSRBB0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 CAD
MSRBB0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 CAD
MSRBB0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 CAD
MSRBB1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 CAD
MSRBB1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style O - Butyl body, threaded bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSOBB0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 CAD
MSOBB0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 CAD
MSOBB0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 CAD
MSOBB0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 CAD
MSOBB0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 CAD
MSOBB0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 CAD
MSOBB0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 CAD
MSOBB0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 CAD
MSOBB0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 CAD
MSOBB0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 CAD
MSOBB1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 CAD
MSOBB1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 CAD
MSOBB1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 CAD
MSOBB1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 CAD
MSOBB1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 CAD
MSOBB2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 CAD
MSOBB2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style R - Nitrile body, threaded bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRPN0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 CAD
MSRPN0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 CAD
MSRPN0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 CAD
MSRPN0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 CAD
MSRPN0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 CAD
MSRPN0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 CAD
MSRPN0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 CAD
MSRPN1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 CAD
MSRPN1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style O - Nitrile body, threaded bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSOPN0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 CAD
MSOPN0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 CAD
MSOPN0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 CAD
MSOPN0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 CAD
MSOPN0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 CAD
MSOPN0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 CAD
MSOPN0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 CAD
MSOPN0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 CAD
MSOPN0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 CAD
MSOPN0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 CAD
MSOPN1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 CAD
MSOPN1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 CAD
MSOPN1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 CAD
MSOPN1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 CAD
MSOPN1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 CAD
MSOPN2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 CAD
MSOPN2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style R - EPDM body, drilled bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRDEE0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 CAD
MSRDEE0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 CAD
MSRDEE0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 CAD
MSRDEE0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 CAD
MSRDEE0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 CAD
MSRDEE0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 CAD
MSRDEE0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 CAD
MSRDEE1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 CAD
MSRDEE1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style O - EPDM body, drilled bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSODEE0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 CAD
MSODEE0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 CAD
MSODEE0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 CAD
MSODEE0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 CAD
MSODEE0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 CAD
MSODEE0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 CAD
MSODEE0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 CAD
MSODEE0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 CAD
MSODEE0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 CAD
MSODEE0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 CAD
MSODEE1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 CAD
MSODEE1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 CAD
MSODEE1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 CAD
MSODEE1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 CAD
MSODEE1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 CAD
MSODEE2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 CAD
MSODEE2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style R - Neoprene body, drilled bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRDNN0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 CAD
MSRDNN0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 CAD
MSRDNN0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 CAD
MSRDNN0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 CAD
MSRDNN0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 CAD
MSRDNN0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 CAD
MSRDNN0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 CAD
MSRDNN1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 CAD
MSRDNN1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style O - Neoprene body, drilled bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSODNN0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 CAD
MSODNN0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 CAD
MSODNN0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 CAD
MSODNN0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 CAD
MSODNN0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 CAD
MSODNN0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 CAD
MSODNN0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 CAD
MSODNN0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 CAD
MSODNN0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 CAD
MSODNN0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 CAD
MSODNN1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 CAD
MSODNN1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 CAD
MSODNN1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 CAD
MSODNN1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 CAD
MSODNN1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 CAD
MSODNN2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 CAD
MSODNN2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style R - Butyl body, drilled bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRDBB0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 CAD
MSRDBB0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 CAD
MSRDBB0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 CAD
MSRDBB0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 CAD
MSRDBB0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 CAD
MSRDBB0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 CAD
MSRDBB0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 CAD
MSRDBB1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 CAD
MSRDBB1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style O - Butyl body, drilled bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSODBB0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 CAD
MSODBB0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 CAD
MSODBB0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 CAD
MSODBB0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 CAD
MSODBB0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 CAD
MSODBB0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 CAD
MSODBB0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 CAD
MSODBB0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 CAD
MSODBB0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 CAD
MSODBB0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 CAD
MSODBB1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 CAD
MSODBB1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 CAD
MSODBB1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 CAD
MSODBB1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 CAD
MSODBB1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 CAD
MSODBB2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 CAD
MSODBB2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style R - Nitrile body, drilled bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSRDPN0200 2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 8 CAD
MSRDPN0250 2 1/2 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 13 CAD
MSRDPN0300 3 6 225 150 100 1/2 3/8 1/2 15 5/8-11NC 14 CAD
MSRDPN0400 4 6 225 150 100 5/8 3/8 1/2 15 5/8-11NC 18 CAD
MSRDPN0500 5 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 23 CAD
MSRDPN0600 6 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 28 CAD
MSRDPN0800 8 6 225 150 100 5/8 3/8 1/2 15 3/4-10NC 40 CAD
MSRDPN1000 10 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 68 CAD
MSRDPN1200 12 8 225 150 100 3/4 1/2 3/4 15 7/8-9NC 94 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

Metrasphere Style O - Nitrile body, drilled bolt holes

Model # Joint
Size
ID
(in)*		 FACE-TO-FACE
(in.)		 PRESSURE VS.
TEMPERATURE		 MOVEMENT CAPABILITY ANGULAR
(Degrees)		 THREAD
SIZE
(in.)		 GROSS
WT.
(lbs.)		 3D
DRAWING
170°F 200°F 220°F Compression Elongation (in.) Lateral (in.)
MSODPN0100 1 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 5 CAD
MSODPN0125 1 1/4 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 6 CAD
MSODPN0150 1 1/2 3-3/4 225 150 100 1/4 3/32 1/4 15 1/2-12NC 7 CAD
MSODPN0200 2 4-1/8 225 150 100 3/8 1/4 3/8 15 5/8-11NC 8 CAD
MSODPN0250 2 1/2 4-1/2 225 150 100 1/2 1/4 3/8 15 5/8-11NC 13 CAD
MSODPN0300 3 5-1/8 225 150 100 1/2 1/4 3/8 15 5/8-11NC 14 CAD
MSODPN0400 4 5-3/8 225 150 100 3/4 3/8 1/2 15 5/8-11NC 18 CAD
MSODPN0500 5 6-3/4 225 150 100 3/4 3/8 1/2 15 3/4-10NC 23 CAD
MSODPN0600 6 7-1/8 225 150 100 3/4 3/8 1/2 15 3/4-10NC 28 CAD
MSODPN0800 8 8-1/8 225 150 100 1 1/2 7/8 15 3/4-10NC 40 CAD
MSODPN1000 10 9-3/8 225 150 100 1 1/2 7/8 15 7/8-9NC 68 CAD
MSODPN1200 12 10-1/4 225 150 100 1 1/2 7/8 15 7/8-9NC 94 CAD
MSODPN1400 14 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 105 CAD
MSODPN1600 16 10-1/2 125 95 35 1 5/8 7/8 15 1-1/8 Hole 120 CAD
MSODPN1800 18 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 125 CAD
MSODPN2000 20 10-1/2 125 95 35 1 5/8 7/8 15 1-1/4 Hole 145 CAD
MSODPN2400 24 10-1/2 125 95 35 1 5/8 7/8 15 1-3/8 Hole 265 CAD

*Consult factory for special material such as Viton, Hypalon, EPDM, Nitrile, etc. and for larger sizes or higher working pressures.

Top

The Metraflex Company, 2323 W. Hubbard Street, Chicago, IL 60612 | 800-621-4347 | 312-738-3800 | Fax 312-738-0415 | Email for information.
Copyright © 2000-2006 Metraflex, Inc.  Metraflex, Metraloop, Fireloop and Cablesphere are registered trademarks of The Metraflex Company.
All Rights Reserved