100 HT Spool Type
Rubber Expansion Joints
The 100 HT is our “Spool” type joint. The joint features the addition of steel cable reinforcements. The 100 HT is also the rubber joint that can be easiest customized with the addition of multiple arches. The joint does not…
Product Description
Product Highlights
Additional Resources
Submittals
Product Description
The 100 HT is our “Spool” type joint. The joint features the addition of steel cable reinforcements. The 100 HT is also the rubber joint that can be easiest customized with the addition of multiple arches. The joint does not require a gasket.
The 100 HT is most commonly used as a pump or equipment connector. It can also be used as an expansion joint if EJMA guidelines are followed. Control rods are optional but recommended.
Product Highlights
- Ideal for reducing noise and vibration in a piping system.
- Reduces pipe stress in your system.
- Handles movement in all directions.
- Available in EPDM, or Butyl elastomers with nylon cord reinforcement
- Does not require a gasket.
- Rated for full vacuum through 12” size.
- See tables for maximum temperature and pressure ratings.
Additional Resources
Submittals
100HT Submittal
100 HT Spool Type
| MODEL # | JOINT SIZE I.D. |
MINIMUM FACE TO-FACE (in.) |
MOVEMENT CAPABILITY | SPRING RATE (lbs./in.) |
EFF. AREA (in. sq.) | WT. (lbs.) WITH RET. RINGS |
3D DRAWING | |||
|---|---|---|---|---|---|---|---|---|---|---|
| COMPRESSION (in.) |
ELONGATION (in.) |
LATERAL (in.) |
ANGULAR (degrees) |
|||||||
| (in.)* | 1 – ARCH | 1 – ARCH | 1 – ARCH | 1 – ARCH | 1 – ARCH | 1 – ARCH | 1 – ARCH | 1 – ARCH | ||
| 100HT0200 | 2 | 6 | 7/16 | 1/4 | 1/2 | 19 | 800 | 20 | 8 | Revit/CAD |
| 100HT0250 | 2- 1/2 | 6 | 7/16 | 1/4 | 1/2 | 15 | 411 | 24 | 10 | Revit/CAD |
| 100HT0300 | 3 | 6 | 7/16 | 1/4 | 1/2 | 13 | 537 | 28 | 11 | Revit/CAD |
| 100HT0400 | 4 | 6 | 7/16 | 1/4 | 1/2 | 10 | 731 | 39 | 15 | Revit/CAD |
| 100HT0500 | 5 | 6 | 7/16 | 1/4 | 1/2 | 8 | 777 | 51 | 17 | Revit/CAD |
| 100HT0600 | 6 | 6 | 7/16 | 1/4 | 1/2 | 6 | 800 | 64 | 20 | Revit/CAD |
| 100HT0800 | 8 | 6 | 11/16 | 3/8 | 1/2 | 6 | 894 | 97 | 28 | Revit/CAD |
| 100HT1000 | 10 | 8 | 11/16 | 3/8 | 1/2 | 5 | 494 | 485 | 38 | Revit/CAD |
| 100HT1200 | 12 | 8 | 11/16 | 3/8 | 1/2 | 5 | 596 | 208 | 53 | Revit/CAD |
| 100HT1400 | 14 | 8 | 11/16 | 3/8 | 1/2 | 4 | 1400 | 254 | 67 | Revit/CAD |
| 100HT1600 | 16 | 8 | 11/16 | 3/8 | 1/2 | 4 | 1850 | 318 | 81 | Revit/CAD |
| 100HT1800 | 18 | 8 | 11/16 | 3/8 | 1/2 | 3 | 2110 | 374 | 88 | Revit/CAD |
| 100HT2000 | 20 | 8 | 13/16 | 7/16 | 1/2 | 3 | 2630 | 450 | 102 | Revit/CAD |
| 100HT2400 | 24 | 10 | 13/16 | 7/16 | 1/2 | 3 | 3160 | 658 | 128 | Revit/CAD |