100 C Concentric Reducer
Rubber Expansion Joints
This is the spool type concentric reducer joint in the lineup. You get all the benefits of the Metrasphere with a couple of variations. The 100 C is most commonly used as a pump or equipment connector. It can also…
Product Description
Product Highlights
Additional Resources
Submittals
Product Description
This is the spool type concentric reducer joint in the lineup. You get all the benefits of the Metrasphere with a couple of variations. The 100 C is most commonly used as a pump or equipment connector. It can also be used as an expansion joint if EJMA guidelines are followed. Control rods are optional but recommended.
Product Highlights
- It is ideal to reduce noise and vibration in a piping system
- It reduces pipe stress in your system
- It has a full-face built-in rubber gasket that make it ideal for use in plastic piping applications
- It handles movement in all directions
- Available in Butyl rubber body with nylon cord reinforcement
- Available in larger sizes than the Reducing Sphere
- Does not require a gasket
- See tables for Maximum temperature and pressure ratings
Additional Resources
Submittals
100C TAPERED EXPANSION JOINT
Concentric Reducer
| MODEL# | PIPE SIZE TO PIPE SIZE |
MINIMUM FACE TO FACE |
MOVEMENT CAPABILITIES | WEIGHT W/RINGS |
|||
|---|---|---|---|---|---|---|---|
| COMPRESSION | ELONGATION | LATERAL | ANGULAR | ||||
| (in.) | (in.) | (in.) | (in.) | (in.) | (degrees) | (lbs.) | |
| 100C2x1x6 | 2x 1 | 6 | .5 | .25 | .5 | 3 | 8 |
| 100C2x1.5×6 | 2x 1.5 | 6 | .5 | .25 | .5 | 3 | 8 |
| 100C2.5×1.5×6 | 2.5 x 1.5 | 6 | .5 | .25 | .5 | 3 | 10 |
| 100C2.5x2x6 | 2.5x 2 | 6 | .5 | .25 | .5 | 3 | 11 |
| 100C3x1.5×6 | 3x 1.5 | 6 | .5 | .25 | .5 | 3 | 11 |
| 100C3x2x6 | 3x 2 | 6 | .5 | .25 | .5 | 3 | 12 |
| 100C3x2.5×6 | 3x 2.5 | 6 | .5 | .25 | .5 | 3 | 13 |
| 100C4x2x6 | 4x 2 | 6 | .5 | .25 | .5 | 3 | 15 |
| 100C4x2.5×6 | 4x 2.5 | 6 | .5 | .25 | .5 | 3 | 16 |
| 100C4x3x6 | 4x 3 | 6 | .5 | .25 | .5 | 3 | 18 |
| 100C5x3x6 | 5x 3 | 6 | .5 | .25 | .5 | 3 | 17 |
| 100C5x4x6 | 5x 4 | 6 | .5 | .25 | .5 | 3 | 18 |
| 100C6x2x8 | 6x 2 | 8 | .5 | .25 | .5 | 3 | 18 |
| 100C6x2.5×6 | 6x 2.5 | 6 | .5 | .25 | .5 | 3 | 19 |
| 100C6x3x6 | 6x 3 | 6 | .5 | .25 | .5 | 3 | 19 |
| 100C6x4x6 | 6x 4 | 6 | .5 | .25 | .5 | 3 | 20 |
| 100C6x4x8 | 6x 4 | 8 | .5 | .25 | .5 | 3 | 24 |
| 100C6x5x6 | 6x 5 | 6 | .5 | .25 | .5 | 3 | 26 |
| 100C8x3x6 | 8x 3 | 6 | .75 | .375 | .5 | 3 | 26 |
| 100C8x4x6 | 8x 4 | 6 | .75 | .375 | .5 | 3 | 28 |
| 100C8x4x8 | 8x 4 | 8 | .75 | .375 | .5 | 3 | 30 |
| 100C8x5x6 | 8x 5 | 6 | .75 | .375 | .5 | 3 | 31 |
| 100C8x6x6 | 8x 6 | 6 | .75 | .375 | .5 | 3 | 33 |
| 100C8x6x8 | 8x 6 | 8 | .75 | .375 | .5 | 3 | 34 |
| 100C10x5x8 | 10x 5 | 8 | .75 | .375 | .5 | 3 | 36 |
| 100C10x6x8 | 10x 6 | 8 | .75 | .375 | .5 | 3 | 38 |
| 100C10x8x6 | 10x 8 | 6 | .75 | .375 | .5 | 3 | 40 |
| 100C10x8x8 | 10x 8 | 8 | .75 | .375 | .5 | 3 | 43 |
| 100C12x6x8 | 12x 6 | 8 | .75 | .375 | .5 | 3 | 48 |
| 100C12x8x6 | 12x 8 | 6 | .75 | .375 | .5 | 3 | 50 |
| 100C12x8x8 | 12x 8 | 8 | .75 | .375 | .5 | 3 | 53 |
| 100C12x10x8 | 12x 10 | 8 | .75 | .375 | .5 | 3 | 59 |
| 100C14x8x8 | 14x 8 | 8 | .75 | .375 | .5 | 2 | 65 |
| 100C14x10x8 | 14x 10 | 8 | .75 | .375 | .5 | 2 | 68 |
| 100C14x12x8 | 14x 12 | 8 | .75 | .375 | .5 | 2 | 70 |
| 100C16x10x8 | 16x 10 | 8 | .75 | .375 | .5 | 2 | 78 |
| 100C16x12x8 | 16x 12 | 8 | .75 | .375 | .5 | 2 | 81 |
| 100C16x14x8 | 16x 14 | 8 | .75 | .375 | .5 | 2 | 89 |
| 100C18x12x8 | 18x 12 | 8 | .75 | .375 | .5 | 1 | 88 |
| 100C18x14x8 | 18x 14 | 8 | .75 | .375 | .5 | 1 | 90 |
| 100C18x16x8 | 18 x 16 | 8 | .75 | .375 | .5 | 1 | 99 |